H&S 2958, Operator'S Manual

Page: 10 / 54

- 2.3 -
2 Safety Continued
2.1 General Safety
1. Read and understand the Operator’s Manual and all safety signs before operating, servicing,
maintaining, adjusting or unplugging the Bale Processor.
2. Only trained, competent persons shall operate the Bale Processor. An untrained operator is not
qualified to operate the machine.
3. Have a first-aid kit available for use should the need arise and know how to use it.
4. Provide a fire extinguisher for use in case of a fire. Store in a highly visible place.
5. Do not allow riders.
6. Wear appropriate protective gear. This list includes but is not limited to:

A hard hat

Protective shoes with slip resistant soles

Protective goggles

Heavy gloves

Hearing protection
7. Place all controls in neutral, stop the engine, disengage the PTO, set the parking brake, remove the
ignition key and wait for all moving parts to stop before servicing, adjusting, repairing, or
unplugging.
8. Wear appropriate hearing protection when operating for long periods of time.
9. Know where overhead electrical lines are located and stay away from them. Electrocution can occur
without direct contact.
10. Review safety related items annually with all personnel who will be operating or maintaining the
Bale Processor.
2.2 Operating Safety
1. Read and understand the Operator’s Manual and all safety signs before using.
2. Place all controls in neutral, stop the engine, set the parking brake, remove the ignition key and wait
for all moving parts to stop before servicing, adjusting, repairing or unplugging.
3. Do not open discharge door unless rotor has stopped turning. Keep others out.
4. Do not operate when any guards are damaged or removed. Install and secure guards before starting.
5. Keep hands, feet, clothing and hair away from all moving and/or rotating parts.
6. Do not allow riders on the Bale Processor or tractor during operation or transport.
7. Clear the area of all bystanders, especially small children, before starting.
8. Attach securely to the tractor using a retainer on the drawbar pin and a safety chain.
9. Do not point discharge opening towards people, animals, or buildings when operating.
10. Stay away from discharge path. Keep others away.
11. Stay away from bale tines when raising or lowering lift frame. Keep others away.
12. Clean reflectors, Slow Moving Vehicle signs, and lights before transporting.
13. Use hazard flashers on tractor when transporting.
14. Install lift frame lock pin before transportation.
15. Before pressurizing the hydraulic system, make sure all components are tight and that steel lines,
hoses, and couplings are in good condition.
16. Review safety instructions with all personnel annually.