H&S 2958, Operator'S Manual

Page: 48 / 54

- 8.1 -
8.12 Hydraulic Deflector Kit Installation
1. Install the deflector kit cylinder mount
into the slotted holes on the shroud.
2. Use the provided 3/8” bolts, nuts, and
washers to secure the mount to the
shroud. Tighten the bolts with the cylinder
mount pushed up as high as the slotted holes
will allow.
Note: T o prevent dam age it is im portant
the mount sit as high as possible.
3. Install the cylinder into the cylinder
mount, secure with the mounting pin
(3-11/16”), 3/8” bolt, flat washer, and
lock nut.