Handlink Technologies WG-604, User Manual

Page: 14 / 174

Easy Hotspot Kit
13
2-1 Connecting the Antennas
The Wireless Subscriber Gateway provides two antenna connectors on the rear of the unit.
Figure 6 Antenna Connectors
2-2 Installation Requirements
Before installing the Wireless Subscriber Gateway, make sure your network meets the following
requirements.
System Requirements
The Wireless Subscriber Gateway requires one of the following types of software:
z
Windows 98 Second Edition/NT/2000/XP/Vista
z
Red Hat Linux 7.3 or later version
z
MAC OS X 10.2.4 or later version
z
Any TCP/IP-enabled systems like Mac OS and UNIX (TCP/IP protocol installed)
z
Standard phone line for xDSL modem Or Coaxial cable for Cable modem
z
Web Browser Software (Microsoft I.E 5.0 or later version or Netscape Navigator 5.0 or later
version)
z
One computer with an installed 10Mbps, 100Mbps or 10/100Mbps Ethernet card
z
UTP network Cable with a RJ-45 connection (Package contents)
Note: Prepare twisted-pair cables with RJ-45 plugs. Use Cat.5 cable for all connections. Make sure
each cable not exceed 328 feet (Approximately 100 meters).