Handlink Technologies WG-604 User Manual Download Page 140

Page: 140 / 174

Easy Hotspot Kit

139

3-2-4-7

Advertisement

The system allow service provider to input 10 URL links for advertisement link purpose.

Figure 156 Advertisement URL Link Setting Screen

Item

Default

Description

Frequency One Time

Only

One Time Only—One Time Only means to send the advertisement link

once after the subscriber Login.

Every~Min(s)—The field means to send the advertisement link every

interval minutes. The value range is 1 to 60 (minutes).

Sequence Randomly Randomly—Display the advertisement page in the random order.

From 1 to 10 —Display the advertisement page in the order as setting.

URL Link

1~10

Empty

This function allows the administrator to input ten different websites in the

table for advertisement. And these 10 websites will display to the

subscribers at random when the subscribers login in the Wireless

Subscriber Gateway system. The input format can be

“http://www.yahoo.com”. The maximum character of the URL Link # is 200.

Click Apply button to save the new settings

Summary of Contents for WG-604















































































































































































Search results

Summary of Contents for WG-604

Reviews:

Related manuals for WG-604

Brands by name

Popular brands

Handlink Technologies WG-604, User Manual

Search results

Summary of Contents for WG-604

Reviews:

Related manuals for WG-604

Brands by name

Popular brands