Handlink Technologies WG-604 User Manual Download Page 20

Page: 20 / 174

Easy Hotspot Kit

Static IP Setting

is selected, then this screen will appear. Enter the IP address information provided

by your ISP.

Figure 14 Internet Connection Setting Screen—Static IP Setting

Item

Default

Description

IP Address

0.0.0.0

Enter the IP address provided by your ISP.

Subnet Mask

0.0.0.0

Enter the subnet mask for the IP address.

Gateway IP

Address

0.0.0.0

Enter the Gateway IP Address provided by your ISP.

Primary DNS

Server

Empty

Enter the primary DNS server IP address for the xDSL/Cable

connection (provided by your ISP).

Secondary

DNS Server

Empty

Enter the secondary DNS server IP address for the xDSL/Cable

connection (provided by your ISP). If the primary DNS Server IP were

not available, meanwhile, Secondary DNS Server IP would start in the

same time.

Summary of Contents for WG-604















































































































































































Search results

Summary of Contents for WG-604

Reviews:

Related manuals for WG-604

Brands by name

Popular brands

Handlink Technologies WG-604, User Manual

Search results

Summary of Contents for WG-604

Reviews:

Related manuals for WG-604

Brands by name

Popular brands