Handlink Technologies WG-604 User Manual Download Page 162

Page: 162 / 174

Easy Hotspot Kit

161

Scheduled Firmware Upgrade

Scheduled Firmware Upgrade is a program that enables an automatic upgrade to the latest firmware

version through the TFTP server.

Figure 182 Scheduled Firmware Upgrade Setting Screen

Item

Default

Description

Disable/Enable

Disables or enables the scheduled firmware upgrade function.

TFTP Server IP

Empty

Enter the IP address of TFTP Server.

File

Synchronization Empty

Enter the file name and location in the File

Synchronization field.

Click the button to display synchronization file example.

Frequency

Weekly

Set the firmware upgrade time. The default value is

“Weekly”.

Figure 183 Synchronization File Sample Code

Note: Do not turn the power off during the upgrade process. This will damage the unit.

Summary of Contents for WG-604















































































































































































Search results

Summary of Contents for WG-604

Reviews:

Related manuals for WG-604

Brands by name

Popular brands

Handlink Technologies WG-604, User Manual

Search results

Summary of Contents for WG-604

Reviews:

Related manuals for WG-604

Brands by name

Popular brands