Handlink Technologies WG-604 User Manual Download Page 164

Page: 164 / 174

Easy Hotspot Kit

163

Item

Description

Username

The username can consist of up to 20 alphanumeric characters and is sensitive.

Password

The password can consist of up to 20 alphanumeric characters and is sensitive.

Confirm

The password for confirmation.

Super Subscriber Disables or enables the super account function.

Idle Time Out

The user idle time out valid is 1 to 1440 minutes. If the idle time out is set as 5

minutes, it means if the account doesn’t send packet in 5 minutes, the account

will logout automatically.

Administrator Account

Step 1: Start your Web browser and enter the factory default IP address

10.59.1.1

in your browser’s

location box. Press Enter.

Figure 186 Web Browser Location Field (Factory Default)

Step 2: The Wireless Subscriber Gateway configuration main menu will appear. Enter

admin

(default)

as the Username and

admin

(default) as the password and click

Login

. If you are first time

setting the system, the wizard setup screen will appear.

Figure 187 Administrator Account Login Screen (First Time)

Username:

admin

Password:

admin

Summary of Contents for WG-604















































































































































































Search results

Summary of Contents for WG-604

Reviews:

Related manuals for WG-604

Brands by name

Popular brands

Handlink Technologies WG-604, User Manual

Search results

Summary of Contents for WG-604

Reviews:

Related manuals for WG-604

Brands by name

Popular brands