manualshive.com logo in svg

Hameg HMC8012, Programmer'S Manual, Page: 29 / 72

Share
Download
Hameg HMC8012 Programmer'S Manual Download Page 29

29

HAMEG Instruments GmbH • Industriestr. 6 • D-63533 Mainhausen • Deutschland  

Subject to change without notice

Tel.: +49 (0) 6182 800 0 • Fax: +49 (0) 6182 800 100 • E-Mail: [email protected] 

Geschäftsführer: Dipl.-Ing. Holger Asmussen, Dipl.-Ing. Andre Vander Stichelen • AG Offenbach am Main HRB 41200

1

1

HAMEG Instruments GmbH • Industriestraße 6 • D-63533 Mainhausen  

Subject to change without notice

Tel.: +49 (0) 6182 800 0 • Fax: +49 (0) 6182 800 100 • E-Mail: [email protected] 

Geschäftsführer: Dipl.-Ing. Holger Asmussen • AG Offenbach am Main HRB 41200

Firmware Version: 01.020 and later

English

S C P I   P r o g r a m m e r s   M a n u a l

H M S   S e r i e s

1

HAMEG Instruments GmbH • Industriestraße 6 • D-63533 Mainhausen  

Subject to change without notice

Tel.: +49 (0) 6182 800 0 • Fax: +49 (0) 6182 800 100 • E-Mail: [email protected] 

Geschäftsführer: Dipl.-Ing. Holger Asmussen • AG Offenbach am Main HRB 41200

Firmware Version: 01.020 and later

English

S C P I   P r o g r a m m e r s   M a n u a l

H M S   S e r i e s

HMO352x, HMO2524

HMO72x ... HMO202x

Firmware Version: 03.00 and later

English

:ACQuire 

:CHAN1OFFSet 

:DISPlay

:HCOPy

*ESR? 

*OPC?

:LOGic:SIZE

:MEASure

:POD1

:SYSTem

*SRE?

S C P I  P r o g r a m m e r s M a n u a l

  H M O   S e r i e s

SCPI Commands HMC8012

MEASure:CONTinuity?

Configures the instrument for continuity measurements. The displayed value will be reset and the instrument immedia-
tely triggers a measurement.

Return values:

<Value> 

 

 

The command returns a single reading.

 

 

 

Range: 4000

Ω

Usage:

  

Query only

MEASure:CURRent:AC? [{<Range>|AUTO|MIN|MAX|DEF}]

Configures the instrument for AC I measurements. The displayed values (including statistic values) will be reset and 
the instrument immediately triggers a measurement.

Return values: 

<Range> 

20mA, 200mA, 2A, 10A

 

AUTO: 

Auto range

 

MIN: 20mA

 

MAX: 10A

 

DEFault: 20mA

 

If the input signal is greater than can be measured on the selected range (manual ranging),  

 

the instrument returns 9.9037.

 

*RST: AUTO

Usage:

  

Query only

MEASure:CURRent:DC? [{

<

Range

>

|AUTO|MIN|MAX|DEF}]

Configures the instrument for DC I measurements. The displayed values (including statistic values) will be reset and 
the instrument immediately triggers a measurement.

Return values: 

<Range> 

20mA, 200mA, 2A, 10A

 

AUTO: 

Auto range

 

MIN: 20mA

 

MAX: 10A

 

DEFault: 20mA

 

If the input signal is greater than can be measured on the selected range (manual ranging),  

 

the instrument returns 9.9037.

 

*RST: AUTO

Usage:

  

Query only

Summary of Contents for HMC8012









































































Reviews:

No comments