manualshive.com logo in svg

Hameg HMC8012, Programmer'S Manual, Page: 24 / 72

Share
Download
Hameg HMC8012 Programmer'S Manual Download Page 24

24

HAMEG Instruments GmbH • Industriestr. 6 • D-63533 Mainhausen • Deutschland  

Subject to change without notice

Tel.: +49 (0) 6182 800 0 • Fax: +49 (0) 6182 800 100 • E-Mail: [email protected] 

Geschäftsführer: Dipl.-Ing. Holger Asmussen, Dipl.-Ing. Andre Vander Stichelen • AG Offenbach am Main HRB 41200

1

1

HAMEG Instruments GmbH • Industriestraße 6 • D-63533 Mainhausen  

Subject to change without notice

Tel.: +49 (0) 6182 800 0 • Fax: +49 (0) 6182 800 100 • E-Mail: [email protected] 

Geschäftsführer: Dipl.-Ing. Holger Asmussen • AG Offenbach am Main HRB 41200

Firmware Version: 01.020 and later

English

S C P I   P r o g r a m m e r s   M a n u a l

H M S   S e r i e s

1

HAMEG Instruments GmbH • Industriestraße 6 • D-63533 Mainhausen  

Subject to change without notice

Tel.: +49 (0) 6182 800 0 • Fax: +49 (0) 6182 800 100 • E-Mail: [email protected] 

Geschäftsführer: Dipl.-Ing. Holger Asmussen • AG Offenbach am Main HRB 41200

Firmware Version: 01.020 and later

English

S C P I   P r o g r a m m e r s   M a n u a l

H M S   S e r i e s

HMO352x, HMO2524

HMO72x ... HMO202x

Firmware Version: 03.00 and later

English

:ACQuire 

:CHAN1OFFSet 

:DISPlay

:HCOPy

*ESR? 

*OPC?

:LOGic:SIZE

:MEASure

:POD1

:SYSTem

*SRE?

S C P I  P r o g r a m m e r s M a n u a l

  H M O   S e r i e s

SCPI Commands HMC8012

SYSTem:BEEPer:STATe 

<

State

>

Switches the front panel control beeper on or off. For example, if the control beeper is disabled, you don‘t get a control 
beep during the manual or signgle trigger.

Parameters:

 

<State>  

ON | OFF

 

*RST:  

ON

SYSTem:BEEPer:STATe?

Returns the state of the front panel control beeper. Returns “0”  for deactivated (OFF) and “1” for activated (ON) 
control beeper.

 

*RST:  

1

SYSTem:BEEPer[:IMMediate]

The instrument returns a single beep immediately.

Usage:

 

Setting only

SYSTem:ERRor[:NEXT]?

Queries an error and removes it from the queue. Positive error numbers are instrument-dependent. Negative error 
numbers are
reserved by the SCPI standard. If the queue is empty, the response is 0, “No error“.

Usage:

  

Query only

SYSTem:LOCal

Sets the system to front panel control. The front panel control is unlocked.

Usage:

 

Setting only

SYSTem:REMote

Sets the system to remote state. The front panel control is locked and can be unlock via soft menu key „Unlock keys“ 
(front panel) or SCPI command SYSTem:LOCal.

Usage:

 

Setting only

SYSTem:RWLock

Sets the system to remote state. The front panel control is locked and can not be unlocked via soft menu key „Unlock 
keys“ (front panel). You are only able to unlock the front panel control via SCPI command SYSTem:LOCal.

Usage:

 

Setting only

SYSTem:VERSion?

Returns the version of the SCPI (= Standard Commands for Programmable Instruments) standard.

Usage:

  

Query only

Summary of Contents for HMC8012









































































Reviews:

No comments