18 June 2016
X6-ElectroMod
A 160AH 1.5KW Electrical Power Generator for the BMW X6
pg. 6
Copyright © 2016, HallonPower. All content and images presented on this website are copyrighted © and all rights are reserved.
All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only. It is neither inferred nor
implied that any item sold here, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page. This document
may be modified at any time and without notice.
Battery base leveling
After removing the Battery Cover (B)
from the luggage compartment below
the trunk floor of the X6, you will notice
that the floor is quite uneven.
For this reason a suitable floor leveling
material will be required in order for the
batteries to sit level.
You could try using several small pieces
of fitted carpeting, layered on top of
each other to fill in the gaps and grooves. Finally, once you have established a level base, you can
top it off with a single larger piece of carpeting to form the base where the batteries will sit.
Do not make this base too thick otherwise you may have trouble closing the trunk
floor after you install the batteries.
System Panel Fastening onto the car body
The System Panel is attached to the base of the trunk of the X6 by 3 L-shaped brackets that slot into
existing floor grooves.
These are not meant to fasten the panel in position with screws but are rather meant to restrict its
movements both vertically and horizontally, keeping it aligned and steady.