18 June 2016
X6-ElectroMod
A 160AH 1.5KW Electrical Power Generator for the BMW X6
pg. 11
Copyright © 2016, HallonPower. All content and images presented on this website are copyrighted © and all rights are reserved.
All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only. It is neither inferred nor
implied that any item sold here, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page. This document
may be modified at any time and without notice.
1. The Power Management Area
The Power Management Panel houses 3 components from CTEK and a Grounding Bus Bar (GBB).
1.
CTEK M300 charger #1.
2.
CTEK Smartpass #2.
3.
CTEK D250S Dual #3.
4.
Grounding Bus Bar #8 (GBB).
Each component has to be screwed into place on the Power Management Area Panel.
Once this is done, the Power Management Area Panel in turn should be taken and fastened onto the
front of the System Panel using the four
fastening holes provided on the System Panel.
All wires should be fastened securely and
threaded to their relevant destination
according to the wiring diagram (see wiring
section). When finished, it should look
something like this.
