72
Innovative Vehicle Solutions
DIAG++
2022
Operator‘s Guide
External pressure / control line sensor
Select sensor type from ‘Modify’ settings (AUX 4 and
AUX 5 configuration only).
Mechanical height sensor
The mechanical height sensor is for use on mechani-
cal suspension trailers. It will allow the EB+ to measure
load and therefore adjust braking force according to
the load plate data.
To configure the mechanical height sensor the user
must first enter the trailer deflection. This is given
by the trailer manufacturer and we allow 10 mm to
65 mm.
Once the deflection is entered, the user must set the
lever length to between the allowed lever length range.
The allowed lever length range varies depending upon
the deflection.
Examples:
A deflection of 20 mm will allow a lever length range
of 100 to 151 mm (as seen in the picture).
A deflection of 55 mm will allow a lever length range
of 276 to 320 mm.
Once the lever length is set, the user then enters the
actual lever length.
The user now selects a left or right installation.
The mechanical height sensor also needs calibrating,
which is performed during EOLT. To perform the
calibration the trailer must be on flat level ground,
unladen and at the normal running king pin height.
Highlight (check) to select left or right installation
Lever length range
