75
2022
Innovative Vehicle Solutions
DIAG++
Operator‘s Guide
DIAG++
Setting wheel scaling
Click on the ‘ECU’ button then click on the ‘Wheel
scale’ tab
The following screen will appear.
The screen shows the default value of a tire size of 306
revs/km, 520 Rdyn (dynamic rolling radius - mm) with
a 100 tooth exciter installed. This value covers tire sizes
from 19.5" to 22.5" and sets the correct ABS function
and odometer of the system.
Note: If the tooth number is not 100 the wheel scale
factor on the Info Centre will read a different value.
Click on the ‘Save configuration’ button to accept.
Wheel scale tab
