Segmented mandrel T213 – Safety
2.3 Intended use
The clamping device is designed for installation in a
machine tool according to CE compliant. Within the
machine tool the clamping device is designed exclu-
sively as a through-bore chuck for bar work and / or
as an end-stop chuck for chuck work.
The clamping device should only be mounted, operat-
ed, maintained, and cleaned by instructed, special-
ized personnel.
Intended use also includes compliance with all the in-
structions in this manual.
The clamping device is to be used for the case of ap-
plication contractually agreed between the
producer/deliverer and the user, as well as such cas-
es of application described in the product description
which are also in accordance with the technical val-
ues.
The safe function of the clamping device is, as far as
it can be foreseen, guaranteed when it is used for the
intended purpose in accordance with the appropriate
safety regulations.
Any use that extends beyond the intended use, or any
other use of the clamping device is considered to be
misuse and can cause dangerous situations.
WARNING!
Danger due to misuse!
Misuse of the clamping device can cause dan-
gerous situations.
Particularly refrain from the following uses of
the clamping device:
Use in machines other than machine tools.
Use in machine tools with technical data oth-
er than that specified on the clamping device.
Claims of any type due to damage arising from non-
intended use are excluded.
Unintended and improper use of the Power Chuck is
for example
If workpieces are not clamped properly
If safety regulations are disregarded and persons
are working at the clamping device without addition-
al protective devices e.g. for machining.
If the clamping device is used for machines or tools
Order h49 7144.907-333
11
