Segmented mandrel T213 – Disassembly
7 Disassembly
If there is break in production that lasts longer than 3
days, the clamping device must be disassembled and
properly stored in accordance with the manufacturer's
specifications [see section »Transport, packaging,
storage«].
Prior to disassembling:
Put the machine in set up mode.
Remove fuels and auxiliary materials, as well as
residual processing materials and dispose of these
items in an environmentally-responsible manner.
7.1 Safety
Safeguarding against
restart
DANGER!
Life-threatening danger if restarted without
authorization
When disassembling there is danger of the en-
ergy supply being switched on inadvertently.
This poses a life-threatening hazard for per-
sons in the danger zone.
Prior to starting the tasks switch off all energy
supplies and safeguard them from being
switched on again.
WARNING!
Danger of injury due to falling components!
When mounting components can fall and
cause severe injury and material damage.
Two people are always required for this task.
Use a crane.
For assembly on a vertically suspended spin-
dle always use a suitable mounting aid.
Order h49 7144.907-333
49
