Segmented mandrel T213 – Transporting, packaging and
storing
ery ticket.
Submit a complaint.
Report any defect as soon as it is detected.
Claims for damage compensation can only be
enforced during the applicable periods for giv-
ing notice of lack of conformity.
5.4 Unpacking and inner-company transport
6. x
Usually the clamping device is packed vertical-
ly. Depending on the size it has threaded bores
in the circumference of the clamping device for
assembling the eye bolts.
In these threaded bores lifting eye bolts can be
screwed in.
To safely lift the clamping device out of the
package it must be hooked into a crane de-
pending on the weight.
For transporting with transport trolley the
clamping device must be positioned in stand-
ing condition. Make sure that a non-slip pad
has been laid.
All tools and accessories which are not in
scope of delivery are marked as optional in the
operating instructions.
Two people are required for this task.
Special tools required:
Crane and lifting eye bolts from weight 15 kg
Fig. 11
1. Screw lifting eye bolts into the thread in the circum-
ference of the clamping device.
2. Hook the load-handling equipment into the lifting
eye bolts.
3. Use a crane to carefully lift the clamping device out
of the transport packaging and put it down on a
stable, level substrate.
4. Prevent the clamping device against rolling away.
Order h49 7144.907-333
27
