Segmented mandrel T213 – Assembly
Fig. 15
Screw in the cylindrical screws [B] and tighten them
only finger-tight.
Check the concentricity at the centering cone of the
centroteX machine adapter [optimum ≤ 0.005 mm],
correct if necessary carefully with a plastic hammer.
Tighten the cylindrical screws [B] firmly with the
required tigthening torque, see »Maintenance«.
The centroteX machine adapter is assembled.
CAUTION!
Risk of injury!
The clamping process / releasing process may
only be initiated for changing the clamping
means.
Never reach into the working area of the
clamping elements! If this is required for
maintenance / cleaning, it must be ensured
that a release of the clamping process can
be excluded!
Order h49 7144.907-333
37
B
