Segmented mandrel T213 – Disassembly
7.3 Disassembly of the clamping unit
Fig. 29
4. x
For the disassembly of the clamping unit [M] the fol-
lowing steps are to be done:
1. Reduce the clamping pressure to minimum.
2. Loosen the clamping unit [M] by the SW.
3. Unscrew the clamping unit [M] completely out of
the segmented mandrel.
The clamping unit is disassembled.
NOTE!
Usually a disassembly of the clamping unit [M]
into its parts draw bolt and segmented clamp-
ing bushing is not intended.
If required disassembly the clamping unit into
its parts by using the changing fixture [see
»Optional Accessories«].
If necessary, get in contact with HAINBUCH.
54
Order h49 7144.907-333
M
SW
