Hainbuch T213 Installation Manual Download

Page: 62 / 76

Segmented mandrel T213 – Maintenance

8.3 Preservation

3. x



Special tools required:



Universal grease 2085/0003



Grease gun



Oil stone



Soft, lint-free cloth

8.3.1 Clamping device

Fig. 36

1. Disassemble the clamping device [see section

»Disassembling the clamping device«].

2. Hone all the bearing surfaces of the clamping de-

vice with an oil stone.

3. Lightly grease all cylindrical screws. Remove ex-

cess grease with a soft, lint-free cloth.

4. Remount the clamping device.
5. Screw all cylindrical screws into the clamping de-

vice again and tighten them hand tight.

For subsequent storage tightening the cylindri-
cal screws hand tight suffices. This facilitates
re-commissioning and protects the cylindrical
screws.

6. Lightly grease all interior and outer surfaces of the

clamping device. Remove excess grease with a
cloth.

7. Pack the clamping device airtight in foil. Place it on

a level, impact-free storage location and safeguard
it from falling.

8.3.2 Adapter

Fig. 37

1. Disassemble the adapter [see section »Disassem-

bling the adapter«].

2. Hone all the bearing surfaces of the adapter with

an oil stone.

3. Lightly grease all cylindrical screws. Remove ex-

cess grease with a soft, lint-free cloth.

4. Remount the adapter.
5. Screw all cylindrical screws into the adapter again

and tighten them finger-tight.

Order h49 7144.907-333

Summary of Contents for T213













































































Search results

Summary of Contents for T213

Reviews:

Related manuals for T213

Brands by name

Popular brands

Hainbuch T213, Installation Manual

Search results

Summary of Contents for T213

Reviews:

Related manuals for T213

Brands by name

Popular brands