Hand Crimp Tool For 3.18mm (.125”) Lighting Terminals
Doc No: ATS-638252600
Release Date: 03-21-12
UNCONTROLLED COPY
Page 1 of 7
Revision: A
Revision Date: 03-21-12
TYPE 4D
CONDUCTOR
BRUSH
STRIP LENGTH
CONDUCTOR
CRIMP
CUT-OFF
TAB
BELL
MOUTH
BEND UP
TWISTING
ROLLING
BEND
DOWN
WIRE
SEAM
INSULATION CRIMP
▲
SEE NOTE
HAND CRIMP
TOOL
Application Tooling
Specification Sheet
Order No. 63825-2600
FEATURES
A full cycle ratcheting hand tool ensures complete crimps
Ergonomic soft grip handles for comfortable crimping
A precision user-friendly terminal locator wire stop holds terminals in the proper crimping position
Right or left handed operation
IPC/WHMA A-620 Class 2 compliant as indicated
RoHS compliant, however RoHS compliant is not required
For 12AWG crimps use hand tool 63825-2700
SCOPE
Products: 3.18mm (.125”) Lighting Terminal for 16AWG and 18AWG wires.
Terminal
Series No.
Terminal Order No.
Reel Form only
Conductor Size Insulation Outside Diameter (1)
Strip Length
AWG
mm²
mm
In.
mm
In.
42824
42824-4001
16 - 18 1.3 – 0.8
1.90 – 3.10
0.075 – 0.122
3.8 – 4.3 0.15 – 0.17
42824-4004
42825
42825-4001
16 - 18 1.3 – 0.8
1.90 – 3.10
0.075 – 0.122
42825-4004
(1) To achieve optimum IPC-A620 insulation crimps, use this insulation OD range.
Customer to cut off terminal from reel: 0.40mm (.016”) maximum cut-off tab.
DEFINITION OF TERMS
