HAI lumina, Advanced Application Manual

Page: 23 / 116

Page 15
OVERALL DESCRIPTION
At the heart of Lumina are six standard modes: Home, Sleep, Away, Vacation, Party and Special. These modes can be activated at
the touch of a button, by time schedule, or event. The system includes HAI’s Advanced Control Programming (ACP) logic that
allows you to set schedules and actions performed by the system, and add new macros to modes as desired. Lumina has an
astronomical clock and automatic daylight savings for accurate dusk to dawn lighting control year round. Optional wireless door
contacts and motion detectors add occupancy based lighting control.
There are several ways to interface with your Lumina which may be included with or added to your system.
Lumina Mode Controller Operation
After your Lumina system has been programmed, the Lumina Mode Controller is used to easily change the mode before leaving
your house, going to bed, arriving home, going on vacation, entertaining for the evening, or any other special event. Whenever
the mode changes, lighting and temperatures are set just the way you like them. The current mode is illuminated so that you can
always tell which mode you are currently in just by glancing at the Lumina Mode Controller.
To change the current mode from a Lumina Mode Controller, simply press the desired mode button. The new mode button will
illuminate and the lighting and temperatures in your home will be changed accordingly.
SPCL
HOME
PARTY
SLEEP
VAC
AWAY
Description of Modes
AWAY
The “AWAY” mode is used when you leave your house during the course of a typical day, and no one is home. Indoor lighting
and temperatures are adjusted for energy savings and outdoor lighting is turned on at dusk to illuminate your path when you arrive
home.
HOME
The “HOME” mode is used when you are at home and do not have any special events planned. You would typically set the mode
to Home when you arrive home from being away, when you wake up in the morning, and after a special event.