HAI lumina, Advanced Application Manual

Page: 97 / 116

Page 89
Serial 1 Function
The "Serial 1 Function" selects the communication protocol used for the first built-in serial interface (J1 Serial) on the
Lumina controller. Select the function for the first built-in serial interface from the list. Use the arrow keys to select the function
then press the ' # ' key.
FUNCTION TYPES
NUMBER DESCRIPTION
OMNI-LINK
3 Serial communication using the Omni-Link protocol
PRO-LINK 4 Serial communication using the Pro-Link protocol
UPB 5 Serial communication using the UPB protocol
RADIO RA 6 Serial communication using the RadioRA protocol
CENTRALITE 9 Serial communication using the CentraLite protocol
Serial 2 - Serial 3 Rate
"Serial 2 Rate" and “Serial 3 Rate" selects the baud rate used for the second and third built-in serial interface
ports (J2 Serial and
J3 Serial, respectively) on the Lumina controller. Select the baud rate for the built-in serial interface from the list.
Serial 2 Function
The "Serial 2 Function" selects the communication protocol used for the second built-in serial interface ports (J2 Serial) on the
Lumina controller. Select the function for the built-in serial interface from the list.
Serial 3 Function
The “Serial 3 Function” by default is set to UPB to utilize HLC Lighting. When using HLC, plug the HAI Powerline Interface
Module (PIM) into the third built-in serial interface (J3 Serial) on the Lumina controller. To change the “Serial 3 Function”,
select the function for the built-in serial interface from the list.
Serial 4 Rate
"Serial 4 Rate" selects the baud rate used when a Serial Interface Module is added to the Lumina system. If a Serial Interface
Module is installed, select its baud rate then press the ' # ' key.
BAUD RATE NUMBER
75 baud 1
150 baud 2
300 baud 3
600 baud 4
1200 baud 5
2400 baud 6
4800 baud 7
9600 baud 8 (default)