HAI lumina, Advanced Application Manual, Page: 75 / 116

Page 67
X-10 Event Buttons
Pressing the 6 (X-10) key allows you to specify an event button activated upon receipt of an X-10 command from a source
external to Lumina. The Lumina can also respond to scene changes initiated at Compose keypads and dimmers. When a scene
change is initiated, Lumina can activate an event button program. You are first prompted to enter the X-10 house code:
X-10 HOUSE CODE:
1-16=A-P
You are then prompted to enter the X-10 unit code:
X-10 UNIT CODE:
1-16 0=ALL
Finally, you are prompted to specify the command that activates the event button:
WHEN X-10 A1:
0=OFF 1=ON 2=SCENE
After specifying the X-10 House Code and X-10 Unit Code, select 0 for Off, 1 for On, or 2 for Scene.
"Off" events will be activated whenever the selected device is turned off. "On" events will be activated whenever the selected
device is turned on. "Scene" events will be activated whenever the selected device is set to the specified scene. "On" events will
also be activated whenever the selected device is set to a scene other than off.
Miscellaneous Event Buttons
Pressing the 7 (MISC) key allows you to select an event button from a list of other event buttons. You are first prompted to select
the event button:
SELECT BUTTON:
WHEN PHONE DEAD
↓
The arrow keys are used to select from a list of event buttons:
•
WHEN ENERGY LO
•
WHEN ENERGY MID
•
WHEN ENERGY HI
•
WHEN ENERGY CRIT
•
WHEN PHONE DEAD
•
WHEN PHONE RING
•
WHEN PHONE OFFHK
•
WHEN PHONE ONHOOK
•
WHEN AC PWR OFF
•
WHEN AC PWR ON
•
WHEN BATTERY LOW
•
WHEN BATTERY OK
•
WHEN DCM FAIL
•
WHEN DCM OK
•
WHEN CAMERA