HAI lumina, Advanced Application Manual

Page: 54 / 116

Page 46
MESSAGES
The Message menu is used to show, log, clear, and send text messages, and to say and phone (dial out) your voice messages. To
enter the Message menu, from the top-level display or from the main menu, press the 8 (MESSAGE) key on the keypad.
5=TEMP 6=STATUS
7=EVENTS 8=MESSAGE
Message
To show, log, clear, and send text messages, and to say and phone (dial out) your voice messages, press the 8 (MESSAGE) key:
MESSAGE
1=SHOW 2=LOG 3=CLEAR
↓
4=SAY 5=PHONE 6=SEND
↑
Show Message
The 1 (SHOW) key allows you to display the selected text message(s) on the keypad's top-level display. This can be a helpful
reminder of special events and occasions.
TRASH
NIGHT
ENTER MESSAGE
↓
You may enter the message number followed by the ' # ' key to display that message, or simply press the down arrow key to scroll
through a list of messages. Press the ' # ' key to display the selected message:
4:00 PM 5/09
TRASH NIGHT
When the message is displayed, the keypad will beep 4 times and the keypad LED will flash continuously. You may press the
' * ' key to acknowledge seeing the message. This will cause the LED to stop flashing, however, the message will remain on the
display until it is manually cleared, or cleared by a program.
Log Message
The 2 (LOG) key allows you to store the selected text message(s) in the Event Log. This can be a helpful to keep track of the
times and dates of events and occurrences.
You may enter the message number followed by the ' # ' key to log that message, or simply press the down arrow key to scroll
through a list of messages. Press the ' # ' key to log the selected message.
Clear Message
The 3 (CLEAR) key allows you to clear the selected text message, or all text messages from the keypad's display.
TRASH NIGHT
ENTER MESSAGE 0=ALL
↓
You may enter the message number followed by the ' # ' key to clear that message, or simply press the down arrow key to scroll
through a list of messages. Press the ' # ' key to clear the selected message, or press 0, then ' # ' to clear all messages.
Say Message
Note: To Say a message, the HAI Two-Way Audio Module (with a speaker) must be installed.
The 4 (SAY) key allows the controller to say the selected voice message over a speaker. This voice message can be an audible
reminder of special events and occasions. You may enter the message number followed by the ' # ' key to say that message, or
simply press the down arrow key to scroll through a list of messages. Press the ' # ' key to say the selected message.