HAI lumina, Advanced Application Manual

Page: 95 / 116

Page 87
Pickup After Hangup
This item is used to disable Lumina from picking up the phone line after the called party hangs up the line.
PICKUP AFTER HANGUP: 1
0=NO 1=YES
Currently, after the called party or the called party's answering machine hangs up the phone line, Lumina picks up the line.
If you wish to turn the Pickup After Hangup Off, press 0 then ' # '. To turn it back On, press 1 then ' # '.
The default setting for Pickup After Hangup is Yes.
Clock Adjustment
If the clock on your Lumina is running faster or slower than the actual time, you can have the Lumina automatically compensate
up to 29 seconds per day. The Lumina will add or subtract the selected amount of time daily.
CLOCK ADJUSTMENT: 30
1-59=-29 TO +29 SEC/DAY
Enter 1-29 to subtract 1-29 seconds. Enter 31-59 to add 1-29 seconds. Enter 30 for no adjustment to the clock.
The default setting is 30.
Model and Software Version
Next, the model number and software version for the system is displayed:
HAI LUMINA
S/W VERSION 2.0
Reset System EEPROM
Select the 1 (YES) key to reset the EEPROM. All programs, names, and setup items will be reset. All system RAM will also be
initialized and the system will restart. This option, if effect, allows the system to be restored to factory fresh configuration.
RESET SYSTEM EEPROM? 0
0=NO 1=YES
Reset System RAM
Select the 1 (YES) key to cause all of the system RAM to be reinitialized. The time, date, and event log will be cleared. Other
volatile memory locations will also be reinitialized. The system RAM should only be reset if the system is acting strangely and
memory corruption is suspected. Resetting the system RAM will not reset any setup items stored in EEPROM.
RESET SYSTEM RAM? 0
0=NO 1=YES
Ethernet MAC Address
The Ethernet MAC Address, short for Media Access Control address, is the hardware address that uniquely identifies Lumina
when connected to a network.
ETHERNET MAC ADDRESS
FF-FF-FF-FF-FF-FF
↑