Hach Sigma 900 MAX, User Manual

Page: 34 / 122

34
Installation
4. Slide the slot in the tubing support around the retainer pin on the top inside surface of
the refrigerator (
Figure 20 on page 41 ). Make sure that the tube exits through the
ends of the tubing support.
5. Position the thumbscrew over the threaded hole and hand-tighten to hold the tubing
support in place.
6. Connect one end of the tubing to the inside tube fitting ( Figure 20 on page 41 ).
7. Insert the other end of the tubing into the off-center hole provided in the cap of the
composite bottle.
4.5 Choosing bottle and retainer configurations
A broad range of bottle configurations is available for the Sigma 900 MAX All Weather
Refrigerated Sampler. Refer to
Figure 14 .
Goodnal STP ST041 Pre Treatment (Sigma 900 MAX All Weather Refrigerated Sampler) Vendor Manual
Q-Pulse Id VM373 Active 29/10/2013
Page 34 of 122