Hach Ultra POLYMETRON 9210, Operator'S Manual

Page: 107 / 116

Page C1
SILKOSTAT 9210
Appendix C : Table of user’s configuration
User’s configuration
Order Function Default/Values Possible values Selected values Date
CALIBRATION / PROGRAMMING
offset interval Frequency 24 h 1…6
cal. sol Concentration 214 ppb Xxxxx
auto. cal Auto calibrate No yes/no
base Day Day/hour
week Mtwtfs Calendar Mtwtfs
hour 00:00:00 Hours
MAINTENANCE/REAGENTS REFILL
Reagents vol. 1 Used reagent volume 2,00 l Xx
Reagents vol. 2 Used reagent volume
2,00 l Xx
Reagents vol. 3 Used reagent volume
2,00 l Xx
Reagents vol. 4 Used reagent volume
2,00 l Xx
MEASURE/MEASURE MODE
Cycle Interval interval/in loops
Interval 15 mn xx hour/minute
ALARMS / ALARM 1
Mode Limit limit/active channel/level sample.
Affect Channel 1 Conc
Limit 1000 ppb Xxx
Direction Low low/high
Hysteresis 0% Xx
Relay N.O. N.O./N.C.
ALARMS / ALARM 2
Mode Limit limit/active channel/level sample.
Affect Channel 2 Conc
Limit 1000 ppb Xxx
Direction Low low/high
Hysteresis 0% Xx
Relay N.O. N.O./N.C.
ALARMS / ALARM 3
Mode Limit limit/active channel/level sample.
Affect Channel 3 Conc
Limit 1000 ppb Xxx
Direction Low low/high
Hysteresis 0% Xx
Relay N.O. N.O./N.C.
ALARMS / ALARM 4
Mode Limit limit/active channel/level sample.
Affect Channel 4 Conc
Limit 1000 ppb Xxx
Direction Low low/high
Hysteresis 0% Xx
Relay N.O. N.O./N.C.