56
After configuring this command, run the
active region-configuration
command to activate the
VLAN-to-instance mapping.
Related commands:
display stp region-configuration
,
check region-configuration
, and
active
region-configuration
.
Examples
# Map VLAN 2 to MSTI 1.
<Sysname> system-view
[Sysname] stp region-configuration
[Sysname-mst-region] instance 1 vlan 2
region-name
Syntax
region-name
name
undo region-name
View
MST region view
Default level
2: System level
Parameters
name
: Specifies the MST region name, a string of 1 to 32 characters.
Description
Use
region-name
to configure the MST region name.
Use
undo region-name
to restore the default MST region name.
By default, the MST region name of a device is its MAC address.
The MST region name, the VLAN-to-instance mapping table, and the MSTP revision level of a device
determine the device's MST region.
After configuring this command, run the
active region-configuration
command to activate the configured
MST region name.
Related commands:
instance
,
revision-level
,
vlan-mapping modulo
,
display stp region-configuration
,
check region-configuration
, and
active region-configuration
.
Examples
# Set the MST region name of the device to
hello
.
<Sysname> system-view
[Sysname] stp region-configuration
[Sysname-mst-region] region-name hello
reset stp
Syntax
reset stp
[
interface
interface-list
]
