113
CAUTION:
•
The IP address assigned to the peer device by the local device is not mandatory on the peer device, or
the peer device can still use a locally configured IP address even if the local device assigned one to it. To
make the IP address assigned by the local device mandatory, you must configure the
ppp ipcp
remote-address
forced
command.
•
After you use the
remote address
command to assign an IP address for the peer device, you cannot
configure the
remote address
/
undo remote address
command for the peer again unless the peer
releases the assigned IP address. Shut down the port to release the assigned IP address before you
configure the
remote address
/
undo remote address
command for the peer. However, after you use the
command to assign an IP address to the peer from the address pool of the specified domain through
AAA authentication, you can configure the command for the peer again. In this case, the original
assigned IP address can still work, and the newly assigned IP address is used when the original one is
released or used by a new PPP access.
•
This command does not take effect until the next IPCP negotiation. To make the
remote address
command take effect, configure the
remote address
command before the
ip address
command.
Related commands:
ip address ppp-negotiate
, and
ppp ipcp remote-address forced
.
Examples
# Specify the IP address to be assigned to the peer device through interface Dialer 1 as 10.0.0.1.
<Sysname> system-view
[Sysname] interface Dialer 1
[Sysname-Dialer1] remote address 10.0.0.1
shutdown
Syntax
shutdown
undo shutdown
View
Dialer interface view
Default level
2: System level
Parameters
None
Description
Use
shutdown
to shut down the MP-group interface.
Use
undo
shutdown
to bring up the MP-group interface.
By default, a MP-group interface is up.
Examples
# Shut down interface Dialer 1.
<Sysname> system-view
[Sysname] interface Dialer 1
[Sysname-Dialer1] shutdown