Preface
The H3C WA documentation set includes eight command references, which describe the commands and
command syntax options available for the H3C WA series access points.
The
Layer 2 Command Reference
describes the configuration commands for Ethernet, loopback, and null
interfaces, VLAN, MAC address table, spanning tree, Layer 2 forwarding, and PPP.
NOTE:
•
Support of the H3C WA series access points for commands may vary by device model. For the
command matrix, see
About the WA Series Access Points Command References.
•
The interface types and output information may vary by device model.
This preface includes:
•
•
•
About the H3C WA series access points documentation set
•
•
•
Audience
This documentation is intended for:
•
Network planners
•
Field technical support and servicing engineers
•
Network administrators working with the WA series
Conventions
This section describes the conventions used in this documentation set.
Command conventions
Convention Description
Boldface
Bold
text represents commands and keywords that you enter literally as shown.
Italic
Italic
text represents arguments that you replace with actual values.
[ ]
Square brackets enclose syntax choices (keywords or arguments) that are optional.
{ x | y | ... }
Braces enclose a set of required syntax choices separated by vertical bars, from which
you select one.
[ x | y | ... ]
Square brackets enclose a set of optional syntax choices separated by vertical bars, from
which you select one or none.
