Command Manual – MPLS Basics
H3C S9500 Series Routing Switches
Chapter 1 MPLS Basics Configuration Commands
1-44
1.1.19 display mpls route-state
Syntax
display mpls route-state
[
vpn-instance
vpn-instance-name
] [
dest-addr
mask-length
]
View
Any view
Default Level
1: Monitor level
Parameters
vpn-instance vpn-instance-name
: Name of the VPN instance.
dest-addr
: Destination IP address.
mask-length
: Length of the mask for the destination IP address.
Description
Use the
display mpls route-state
command to display route related information.
With no VPN instance specified, the command displays route related information of the
public network.
With the
dest-addr dest-mask
arguments not specified, the command displays all route
related information.
Examples
# Display all route related information.
<Sysname> display mpls route-state
DEST/MASK NEXT-HOP OUT-INTERFACE STATE LSP-COUNT VPN-INDEX
-----------------------------------------------------------------
1.1.1.1/32 10.0.0.1 Vlan16 ESTA 1 0
1.1.20 display mpls static-lsp
Syntax
display mpls static-lsp
[
lsp-name
lsp-name
] [ {
exclude
|
include
}
dest-addr
mask-length
] [
verbose
]
View
Any view
