Command Manual – MPLS L3VPN
H3C S9500 Series Routing Switches
Chapter 1 MPLS L3VPN Configuration Commands
1-46
View
BGP-VPNv4 subaddress family view/BGP-L2VPN address family view/VPLS address
family view
Default Level
2: System level
Parameters
group-name
: Name of the peer group.
ip-address
: IP address of the peer.
Description
Use the
peer next-hop-local
command to configure the device to use the local
address as the next hop of a route when advertising it to a peer or peer group.
Use the
undo peer next-hop-local
command to remove the configuration.
Examples
# In BGP-VPNv4 subaddress family view, configure the device to use the local address
as the next hop of a route when advertising it to peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] ipv4-family vpnv4
[Sysname-bgp-af-vpnv4] peer test next-hop-local
# In BGP-L2VPN address family view, configure the device to use the local address as
the next hop of a route when advertising it to peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] l2vpn-family
[Sysname-bgp-af-l2vpn] peer test next-hop-local
# In VPLS address family view, configure the device to use the local address as the
next hop of a route when advertising it to peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname] vpls-family
[Sysname-bgp-af-vpls] peer test next-hop-local
1.1.38 peer public-as-only (BGP-VPNv4 subaddress family view)
Syntax
peer
{
group-name | ip-address
}
public-as-only
