Command Manual – MPLS L3VPN
H3C S9500 Series Routing Switches
Chapter 1 MPLS L3VPN Configuration Commands
1-43
[Sysname-bgp-af-vpnv4] peer 1.1.1.1 group test
# In BGP-L2VPN address family view, add peer 1.1.1.1 into peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] group test external
[Sysname-bgp] l2vpn-family
[Sysname-bgp-af-l2vpn] peer 1.1.1.1 group test
# In VPLS address family view, add peer 1.1.1.1 into peer group test.
<Sysname> system-view
[Sysname] bgp 100
[Sysname-bgp] group test external
[Sysname] vpls-family
[Sysname-bgp-af-vpls] peer 1.1.1.1 group test
1.1.34 peer ip-prefix (BGP-VPNv4 subaddress family view)
Syntax
peer
{
ip-address
|
group-name
}
ip-prefix
prefix-name
{
import
|
export
}
undo peer
{
ip-address
|
group-name
}
ip-prefix
prefix-name
{
import
|
export
}
View
BGP-VPNv4 subaddress family view
Default Level
2: System level
Parameters
ip-address
: IP address of the peer.
group-name
: Name of the peer group.
prefix-name
: Name of the IP prefix list.
import
: Filters the received routes.
export
: Filters the routes to be advertised.
Description
Use the
peer ip-prefix
command to apply a route filtering policy based on IP prefix list
to a peer or peer group.
Use the
undo peer ip-prefix
command to remove the configuration.
By default, no route filtering policy based on IP prefix list is applied to a peer or peer
group.
