Command Manual – MPLS L3VPN
H3C S9500 Series Routing Switches
Chapter 1 MPLS L3VPN Configuration Commands
1-28
OSPF Process 100 with Router ID 100.1.1.2
Sham Link:
Area NeighborId Source-IP Destination-IP State Cost
0.0.0.1 100.1.1.2 3.3.3.3 5.5.5.5 P-2-P 10
Table 1-16
Description on the fields of the
display ospf sham-link
command
Field
Description
Area
OSPF area to which the sham link belongs
NeighborId
Router ID of the sham link
Source-IP
Source IP address of the sham link
Destination-IP
Destination IP address of the sham link
State
Status of the sham link interface
Cost
Cost of the sham link
# Display information about OSPF sham links in area 1.
<Sysname> display ospf sham-link area 1
OSPF Process 100 with Router ID 100.1.1.2
Sham-Link: 3.3.3.3 --> 5.5.5.5
Neighbour State: Full
Area: 0.0.0.1
Cost: 10 State: P-2-P, Type: Sham
Timers: Hello 10 , Dead 40 , Retransmit 5 , Transmit Delay 1
Table 1-17
Description on the fields of the
display ospf sham-link area
command
Field
Description
Sham-Link
Sham link expressed in the format of source IP
address to destination IP address
Neighbour State
Status of the sham link neighbor
Area
Destination IP address of the sham link
Cost
Cost of the sham link
State
Status of the sham link
Type
Type of the sham link
Timers
Timers of the sham link
