Command Manual – MPLS Basics
H3C S9500 Series Routing Switches
Chapter 1 MPLS Basics Configuration Commands
1-40
Loop Detection : Off
DU Re-advertise Timer : 30 Sec DU Re-advertise Flag : On
DU Explicit Request : Off Request Retry Flag : On
Label Distribution Mode : Ordered Label Retention Mode : Liberal
1.1.17 display mpls lsp
Syntax
display mpls lsp
[ {
incoming-interface
|
outgoing-interface
}
interface-type
interface-number
] [
in-label
in-label-value
] [
out-label
out-label-value
] [ {
exclude
|
include
}
dest-addr mask-length
] [
vpn-instance
vpn-instance-name
] [
asbr
|
protocol
{
bgp
|
bgp-ipv6
|
crldp
|
ldp
|
rsvp-te
|
static
|
static-cr
} ] [
egress
|
ingress
|
transit
] [
verbose
]
View
Any view
Default Level
1: Monitor level
Parameters
incoming-interface
: Incoming interface of the LSPs.
outgoing-interface
: Outgoing interface of the LSPs.
interface-type interface-number
: Specifies an interface by its type and number.
in-label in-label-value
: Value of the incoming label.
out-label out-label-value
: Value of the outgoing label.
exclude
: Excludes the specified FEC.
include
: Includes the specified FEC.
dest-addr
: Destination address.
mask-length
: Length of the mask for the destination address.
vpn-instance
vpn-instance-name
: Name of the LDP-enabled VPN instance.
asbr
: Displays information about ASBR established LSPs.
protocol
: Displays information about LSPs established by a specified protocol.
bgp
: Displays information about BGP LSPs.
bgp-ipv6
: Displays information about IPv6 BGP LSPs, that is, BGP4+ LSPs.
crldp
: Displays information about LDP CR-LSPs.
ldp
: Displays information about LDP LSPs.
rsvp-te
: Displays information about CR-LSPs established by RSVP-TE.
