H3C Neocean IX1000, Installation Manual

Page: 46 / 64

Installation Manual
Neocean IX1000 Network Storage System
Chapter 4 Initial Configuration and System Startup Information
4-7
III. View Startup information
After the IX1000 is powered on, serial port 1 redirects the startup information of the
IX1000 to the client PC and the HyperTerminal program receives the displayed
information.
The startup information includes the following diagnostic information:
z
Memory size
z
BIOS version information
z
RAID information
z
Information of the boot device selection menu
z
GRUB information
You can determine whether the IX1000 system is started normally by viewing the
information above.
Warning
The following system startup information is provided for you to view only. No manual
intervention is required during the system startup. Modification to the startup
information by nonprofessional personnel will lead to unpredictable consequences.
H3C shall not be held liable for any consequence caused thereby.
1) BIOS boot information
After the system starts up, HyperTerminal on the client PC displays the following
information, as shown in
Figure 4-8 .
Figure 4-8
System startup information display
2) Memory size and BIOS version information
After the information in Figure 4-8 is displayed, HyperTerminal displays the memory
size and BIOS version information, as shown in Figure 4-9 .