Installation Manual
Neocean IX1000 Network Storage System
Chapter 3 Installing an IX1000
3-7
z
As shown in
, put the left tray-mounted slide rail (pay attention to the
sides) between the front and rear mount angles of the rack, and align the screw
holes on the slide rail with the holes on the mount angles. Fix the slide rail firmly to
the mount angles with the accompanied thumb screws.
(1)
(2)
(3)
(4)
(1) Front mount angle
(2) Rear mount angle
(3) Tray of the left tray-mounted slide rail
(4) Rail end
Figure 3-8
Install tray-mounted slide rail (1)
Caution:
As shown in
, pay attention to the position of the slide rail when fixing the
screws. The screw cap can fit well with the square of the mount angle, to restrain the
movement of the slide rail in horizontal and vertical directions.
Figure 3-9
Thumb screw detail
Note:
The slide rail is extensible to fit racks of different sizes, as shown in Figure 3-17.
Pull/push the end of the slide rail to adjust its length to the actual distance between the
front and rear mount angles of the rack.
