TLC2100SHD Operating Instructions
Document 900.0060 Rev 1.01
31
Auto Adv Rep allows you to set whether or not the unit will multiply the One Shot
Rec when it performs an automatic advance in the One Shot Record mode. Note that
the unit automatically performs an automatic advance every three minutes if no One
Shot has been received to diminish excessive head wear on the unit.
Play Mode allows you to set the unit to automatically detect whether a VHS or S-VHS
tape has been inserted in the cassette compartment or to set the unit to
VHS
. Normally
this setting should be on
Auto
. However, if an S-VHS tape has been recorded in a VHS
mode on another recorder, choose
VHS
for this setting.
Azimuth Sw allows selection of Brown (B+) or Red (R-) head playback, or normal
playback. Normal is automatically selected for recording. Contact factory for more
information about brown and red heads.
Search Speed allows selection of the playback speed during Rewind/Search and Fast
Forward/Search. You may choose
3X
,
5X
,
7X
or
9X
. See
Play/Record Operation Controls
on page
7
for more information.
Timer Program Submenu
The Timer submenu allows 6 timer events to be programmed for the selected day (that
is, 42 events in total). An event consists of the unit recording at a user-specified speed,
with the timer output turned either off (5V) or on (0V).
Timer Program
Exit
Day:
Pro
1
2
3
4
5
6
WED
Time
—:—
—:—
—:—
—:—
—:—
—:—
Speed
02(06)
02
02
02
02
02
T.O.
5V
5V
5V
5V
5V
5V
Repeat All Days: NO
Important Note The
Time parameter only
sets the time for an
event to begin. The
event ends when next
programmed event
begins—even if the next
event begins on another
day.
However, a line may be
programmed to begin a
Stop
event (available as
a selection of the
Speed
parameter).
Therefore, if you wish
an event to stop at a
specific time, you must
program it to do so as a
separate event.
