TLC2100SHD Operating Instructions
Document 900.0060 Rev 1.01
25
Note
The Seconds need not be programmed; as soon as NEXT is
pressed, the seconds begin to count off automatically.
It is not necessary to exit the Time Parameter and then enter the
Date parameter. NEXT and PREV. will move to the next or
previous parameter, even if they are in another menu line.
6.
The
1
in the month position will be highlighted. Press UP twice.
3
(March)
displays.
7.
Press NEXT.
01
, the day position, highlights. Press UP until
06
displays.
8.
Press NEXT.
96
highlights. Press UP until
03
displays.
9.
Press PROG. to end editing for this line. The cursor arrow displays again next to
the Time line. Note that the Day line will now display
Thu
. The Day parameter is
automatically entered after the Date parameter is entered.
10. Press UP to move the cursor to the Exit line. Press PROG. to exit the submenu.
The Main Menu will now display. The cursor will be next to the Exit line of the
Main Menu. Press PROG. to exit the Main Menu.
11. Your monitor will now display the Time and Date, often known as a Time/Date
stamp. See
Display Options Submenu
on page
26
for more information about the
formats of the Time/Date stamp. If you have not yet programmed any of the
Display Options submenu parameters, the Time/Date stamp should appear as
follows:
3-06-03
02:56:17P
THU A0
02
