TLC2100SHD Operating Instructions
Document 900.0060 Rev 1.01
61
Menu programming
does not hold after
power loss
Keep unit powered for a minimum of 24 hours
to charge internal battery.
Menus
Error
is lit on Digital
Display
Unplug AC power to VCR, wait five seconds,
restore AC power. Immediately press EJECT
button to extract tape. If unit repeatedly goes
into
Error
condition, service is required.
Appendix C, Warning
Codes
Cannot display VCR
menu on monitor
Check cabling. If unit is connected to a device
such as a quad or multiplexer, set device to
"play/view", "live", or other setting to access
VCR menu.
Getting Started
Controls
Menus
Bad or distorted images
in PLAY mode
Adjust tracking controls. Set 6-hour control to
12 o’clock position. Set slow tracking to 10
o’clock position.
Controls
VCR does not change
speed during alarm
Review settings in Alarm Record Options
submenu.
Verify correct Alarm Input wiring to the VCR.
Manually short the Alarm Input pins 1 to 15 and
verify the VCR recognizes the alarm.
Controls
Menus
Appendix A, External
Interface
Monitor video appears
washed out
The video input signal is not terminated
correctly or is not set at the correct level.
Controls
Menus
If this happens:
(cont’d)
Check:
For more
information, see:
