TLC2100SHD Operating Instructions
Document 900.0060 Rev 1.01
51
B
Remote Control Feature
The Remote Control Feature permits control of the unit from a remote wired location.
This is accomplished by wiring contacts 13 and 15 on the 15-pin D connector on the
rear of the recorder to a switch/resistor network, see
Figure B-1
. The following functions
can be activated by using the remote pins: STOP, PLAY, STILL, REWIND, FIELD
FORWARD, FAST FORWARD, SPEED CHANGE, and RECORD.
Figure B-1
Resistor Network
•
Not active in LOCK mode
•
The Resistor Network is supplied as service part, Number F1372561
•
Remote Control may also be activated using standard resistors in place of the
Resistor Network, see
Figure B-2
:
Figure B-2
Standard Resistors
1
2
3
4
5
6
7
8
1 5
1 3
GND
REMOTE
IN
STOP PLAY STILL REW FIELD F.F. MODE REC
FWD
UP
1.5k
3.3k
6.2k
1 0 k
15k
33k
68k
1
2
3
4
5
6
7
8
