June 10, 2003
Menus
36
STD/Remote Port Submenu
This menu is active only on units containing the RS-232 option.
This feature allows you to control your VCR through the STD/Remote Port using a PC
or other controlling device. The RS-232 protocol is set in the STD/Remote Port menu.
A list of RS-232 commands follows below.
This submenu sets the protocol for the STD/Remote port and is displayed in the Main
Menu:
Pin out for RS-232 Port:
The following parameters are available with this menu:
•
Baud: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400
•
Parity: None, Odd, Even
•
Mode: 1 Stop, 2 Stop
•
Code: 7-Bit ASCII, 8-Bit ASCII
For operational information for remote usage, see
Appendix B, Remote Control Feature
.
See also
Rear Panel Functions
,
Video Installation
, and
Audio Installation
for more information.
For more information concerning STD operation, please contact factory or authorized
service center.
STD/Remote Port
Exit
Baud: 19200
Parity: None
Mode: 1-Stop
Code: 8-bit ASCII
1. GND
2. TXD (IN)
3. RXD (OUT)
7. GND
