June 10, 2003
Menus
28
System Code Field
System Code lets you enter up to 24 characters that will be displayed with the
on-screen Time/Date stamp. You may enter the digits 0-9, upper and lower case
alphabet letters, a space and a variety of punctuation and graphic characters. Note that
the first ’character’ displayed in a character position is always a blank space. If you wish
to insert a blank space, press NEXT or PREV. immediately after moving to the desired
character position.
To enter a System Code:
1.
Using the UP or DOWN buttons, move the cursor next to the System Code line.
Press the PROG. button. A cursor will be displayed.
2.
Press the UP or DOWN buttons to scroll through the character choices.
3.
When the desired character is displayed, press the NEXT button to move to the
next character position. Repeat this procedure until all desired characters are
displayed.
4.
If you wish to change a character already displayed, press the PREV. button until
the desired character is highlighted. Use the UP or DOWN buttons to select the
new character. Use the PREV. or NEXT buttons to move to the next character
position you wish to edit or enter.
5.
When you have entered all the desired characters, press PROG.
