Vitek SAGA "ST" Series User Manual Download Page 1

Page: 1 / 180

VITEK

SAGA “ST” Series

4, 8, and 16 Channel Digital

Video Recorders

• The Industry’s only MPEG4 Compression with Non-Conditional Refresh

• Control up to 16 DVRs via Keyboard or IR Remote control

• 120 IPS Recording and Real-Time 480 IPS Display

• MPEG-4 Compression

• Up to 42 HDD support: 1.0 Terabyte Internal Storage (2x - 500GB HDD) and Up to 20

Terabytes External Storage (4x - 10 HDD Expansion bay units)

• 4 Channel audio

• 2-Way communication over the internet via Remote Client Software

• Multi-site remote client

• Built-in DVD/RW drive

• Accepts 4 External (VT-XHD10) HDD Bays for an Additional 40 Hard Drives

• Block Search Function Retrieves Lost Files, Even from Damaged Hard Drives

• Embedded Linux OS

• Dynamic IP support (DDNS)

• Simultaneous D1 (720 x 480 @ 30 ips), Half-D1 (720 x 240 @ 60 ips), and CIF (360 x

240 @ 120 ips) recording

• Maximum File Size of 5K (CIF), 7K (Half D1), 10K (D1)

• Continuous, Motion, Alarm, V-Loss, Scheduled recording modes

• Numerous search modes: Calendar, Search & Copy, Time, Event, Block, File, Bookmark &

Log

• Multi-site Monitoring for a maximum of 16 Independent DVRs and a maximum of 256

Cameras

• Notification e-mail to up to 10 accounts on Motion, Alarm, V-Loss, HDD Fail

• Quadruplex: Record, Playback, Network Transmission and Backup

• Backup to External HDD, CD-RW, DVD-RW, USB Memory Stick

Summary of Contents for SAGA "ST" Series





















































































































































































Search results

Summary of Contents for SAGA "ST" Series

Reviews:

Related manuals for SAGA "ST" Series

Brands by name

Popular brands

Vitek SAGA "ST" Series, User Manual

Search results

Summary of Contents for SAGA "ST" Series

Reviews:

Related manuals for SAGA "ST" Series

Brands by name

Popular brands