Vitek SAGA "ST" Series User Manual Download Page 109

Page: 109 / 180

SAGA “ST” Series

108

6.5.8.3 Save menu to file

Highlight SAVE MENU TO FILE and then press the
ENTER button to save the menu settings onto a
USB flash memory. The USB flash memory

must

be inserted into the front USB port.

When saving the DVR menu settings is successful,
the DVR will display “ENV COPY SUCCESS”.

6.5.9 FIRMWARE UPGRADE

The DVR’s software can be upgraded for the latest feature updates, fixes and
improvements via the USB flash memory.

Highlight FIRMWARE UPGRADE and then press the
ENTER button to access the firmware upgrade
screen.

Select YES and then press the ENTER button to
begin the firmware upgrade. The USB flash memory
with the upgrade file

must

be inserted into the front

USB port.

Summary of Contents for SAGA "ST" Series





















































































































































































Search results

Summary of Contents for SAGA "ST" Series

Reviews:

Related manuals for SAGA "ST" Series

Brands by name

Popular brands

Vitek SAGA "ST" Series, User Manual

Search results

Summary of Contents for SAGA "ST" Series

Reviews:

Related manuals for SAGA "ST" Series

Brands by name

Popular brands