Vitek SAGA "ST" Series, User Manual

Page: 57 / 180

SAGA “ST” Series
56
5.2 PAN / TILT / ZOOM CAMERA CONTROL
The SAGA series DVR comes with an extensive list of compatible PTZ cameras.
Please read and follow the PTZ manufacturer’s instruction manual and understand its
settings fully prior to proceeding to attempt to connect and control the PTZ camera
through the DVR. Please refer to PTZ model selection under 6.6.5 PTZ under 6.6 LINK
SETUP on page 115.
5.2.1 BASIC PAN / TILT / ZOOM CONTROL
Select the desired channel by pressing the numeric
button for the full screen view.
Press the PTZ button to enter the PTZ camera control
mode. Use the directional buttons for the pan and tilt
movement, +/- buttons to focus in/out, or AF button
for auto focus, and the shuttle ring to zoom in and out.
The movement speed of the PTZ camera can be
changed by pressing the FUNCTION button and then
the + or – button to increase or decrease the speed.
5.2.2 CREATING AND MOVING TO PRESET POINTS
During the PTZ control mode, press the PRESET
button to activate the PTZ(PRESET)MOVE mode. If
there are any preset points predefined, pressing the
numeric buttons will move the PTZ camera to the
preset points. A total of 16 preset points can be
recalled.