Vitek SAGA "ST" Series, User Manual

Page: 128 / 180

SAGA “ST” Series
127
e.
Use IP Server
The DVR can be located on the internet using the MAC address displayed in the
status screen. If the MAC address is to be used, “Use IP Server” box must be
checked.
f. Domain Name / Use DDNS
The DVR can be located on the internet using a domain name, or a web address.
The DVR must be registered with a Dynamic DNS service in order to be located. If
the Domain Name is to be used, “Use DDNS” box must be checked.
g. Serial Port
Select the COM port and the baud rate if RS-232C or RS-485 protocols are used to
connect to the DVR.
h.
Password
Enter the password to access the DVR remotely. The password level entered will
grant the access privileges assigned by the administrator.
i.
Description
Add comments or notes to the DVR in this box.
j.
Add
Once all the information for the DVR has been entered, click on ADD to add to the
DVR list.
k.
Change
After changing the DVR information, click on CHANGE to update the DVR
information.
l.
Delete
Highlight a DVR from the DVR List and then click on DELETE to remove from the
DVR List.
m.
Connect
Highlight a DVR from the DVR List and then click on CONNECT to remotely connect
to the DVR.
n.
Cancel
Click on CANCEL to exit from the DVR List menu.