Vitek SAGA "ST" Series, User Manual

Page: 99 / 180

SAGA “ST” Series
98
6.4.8 RELAY OUTPUT
Highlight RELAY OUTPUT and then press the
ENTER button to access the relay output submenu.
The first page lists relay output options for channels 1
through 8. For each channel, it is possible to
customize relay 1 through 3 for each of the event
options. To change the relay output for each event,
highlight the relay output and then press + or –
buttons to change to the desired output number.
The second page lists relay output options for
channels 9 through 16.
The third page lists the relay output time for relay
outputs 1 through 3. Select the relay output time from
1 to 30 seconds. The default time is 1 second.
The fourth relay can be customized to be used with
the following options:
z
POWER LOSS: relay triggered when the
DVR loses power
z
HDD ERROR: relay triggered when the
hard disk drive fails
z
USER: manual relay operation
z
NOT USED