Guyson Euroblast PF, Operating & Maintenance Instructions

Page: 41 / 84

Operation &
Maintenance
Manual
Issue: 09 A6ML0165 - Euroblast PF Manual
Date: 05/2019 Page: 41
7.1.9.5 Replacing the HEPA14 Filter Cartridge, C600 Dust Collector
A secondary HEPA14 filter has been added to ensure maximum air filtration, minimising the amount
of air born particles exhausted by the system. The health of this filter is checked by using the
Magnehelic manometer gauge fitted to the side of the machine. This measures the differential
pressure across the main filters. When the pressure difference reaches 2.5” Water Gauge then a filter
change will be necessary.
1. Undo the screws from the filter door and remove
2. Check gasket for signs of damage
3. Remove the clamp bars by unscrewing the retaining knobs either side
4. The filter can now be lifted and removed
5. The HEPA14 filter
is fitted with a continuous airtight seal on one side. Ensure the filter is fitted with the
seal side on the dirty side of the airflow (facing down).
1 2 3
4 5
HEPA filter
(Y1CA0064)
Filter dirty side
(with seal)