GÜDE Expert Power Control 8314, Manual

Page: 94 / 111

94
Expert Power Control 8316 © 2022 GUDE Systems GmbH
Specifications
Residual Current Monitor 0x8280 0x82cf Input Registers
Bank Power Source Select 0x000 0x00f Holding Registers
Fan Mode 0x010 0x01f Holding Registers
This chapter is general for all Gude devices. Depending on the device type, some
ports or certain sensors are not available.
The Unit-ID is ignored because the device is uniquely identified by its IP address.
Supported Modbus TCP Functions
Function Request Code
Read Coils 0x01
Read Discrete Inputs 0x02
Write Single Coil 0x05
Write Multiple Coils 0x0f
Read Input Registers 0x04
Read Holding Registers 0x03
Write Holding Register 0x06
Write Multiple Holding Registers 0x10
Read Device Identification 0x2B / 0x0E
Coils
Device Resource Start End Device Function
Power/Output/eFuse 0x000 0x3ff Coil represens Port State
Discrete Inputs
Device Resource Start End Function when set
DC Inputs 0x400 0x7ff Input logically 1
Stop Condition active 0x800 0x800 Stop Input active
POE active 0x801 0x801 POE active
Status Power Sources 0x1000 0x100f Power Source active
OVP active (Line-Ins) 0x1010 0x101f OVP active
eFuse Error 0x1100 0x11ff eFuse Error
Status Power Sources Offset
EPC 8221 / 8226 0 = Bank A, 1 = Bank B
ENC 2111 / 2191 0 = Pwr1, 1 = Pwr2
ESB 7213 / 7214 0 = Pwr1, 1 = Pwr2 (only 7214)